Now is the spring time

Every weekend

We would choose to travel by car

So encountered when traveling by car

Emergency situations how to do it?

Us look!

1. The inlet and outlet hose rupture: rupture is not available coated with a layer of soap wrapped cloth leaks;

The rupture is large, the hose rupture can be cut, put in the middle of a bamboo or iron pipe, and tight wire bundles.

2. broken fan belt: the broken belt can drive away with a good iron Sizha or an open open-and-go approach.

3. screw slider: a slider screw can lead to oil spills or loose connecting rod, it can not work. When the time to repair the original screw with a hammer can hammer flat, so that both sides of the expansion increases refastenable good, but not detached repeatedly, until the next maintenance.

4. Tank injury: the vehicle in use, found leak from the tank, the leaks can be wiped clean with soap or bubble gum coated in oil, the temporarily blocked; repair with epoxy adhesive, the better.

The pipeline rupture: pipeline rupture may rupture when rubbed clean, coated with soap, with a cloth or plastic sheet wound around the pipe rupture, and tight wire bundles, then coated with a layer of soap.

6. Tubing break: rubber or plastic tube can be found with a tubing diameter of the root socket adapted to break when the tubing. As the socket is not tight enough, both ends of the wire and then tied tightly to prevent oil leakage.

7. A cylinder head appears trachoma and oil spills, leaks: trachoma according to the size, the choice of the appropriate size electrical fuse, hand hammer gently drop into the blisters, can eliminate the oil spills, leaks.

8. The pipeline joints oil: motor vehicle use, such as engine oil pipe joints, mostly flared tubing and the tubing is not sealed due to the nut. Available yarn wound on the lower edge of the horn, and then the flare nut screwed pipe joint; bubble gum may also be chewed or maltose into a paste, coated nut oil pocket to be xerogels newcomer seal.

9. A fuel pump membrane or diaphragm rupture or break: detachable diaphragm pump removed, wood glue, bakelite or plastic sheeting electrical insulation original shape, size, forming saw filing, polishing and installed.

10. The valve spring break: break the valve spring, the spring may be removed off, to turn off the two loaded, can be used.

My advice: if problems arise not allowed to draw their own, then hit the phone or to a nearby repair rescue it! After all, safety comes first.