I believe that many owners do maintenance when a tire wheel alignment and balancing heard, if you know of ambiguity, it is easy to be fooled maintenance personnel, we take a look in the end what is the difference?

About Balancing

What is balancing?

When the vehicle wheel rotates at high speed together, will form a dynamic imbalance, caused by vehicle wheels traveling in a dither, the phenomenon of vibration of the steering wheel, the correction process is commonly known as dynamic balance, i.e. installation of balancer!

Balancing needs to be done under what circumstances?

1. Replace the new tires to be done balancing;

2. The front and rear tires unilateral partial wear;

3. The steering wheel too heavy to float or shaking while driving;

Car left or right deviation 4. straight.

About four-wheel alignment

What is wheel alignment?

Adjusting the wheel alignment of the wheel tilt value and toe values, whether the angle of inclination, the angle or camber angle as long as it is possible to let the tire to ensure that the level of partial wear with avoided; and the front beam is a vehicle steering wheel can No self-aligning, the vehicle traveling in a straight line role.

Wheel alignment needs to be done and under what circumstances?

1. The vehicle steering wheel is not correct when driving straight flat road;

2. The emergence of the phenomenon of deviation or eat tires;

3. The body will beat unstable;

4. The steering wheel side to side;

5. There is the case with floating;

The vehicle had a collision had occurred.

Finally, wheel alignment and balancing condition affecting movement stability, safety, fuel economy, and the whole car vehicle, but adjust the balancing weight balance of the tire, usually after just moving off the tires, we need to do, is maintenance project. The wheel alignment is to adjust the angle coefficient between the vehicle chassis systems, it is maintenance means, if you are driving is not abnormal, do not easily done.