Speaking to change a spare tire, said simple is not simple, said the complex is not so complicated, there is a tire removal methods and rules, if the method is not correct for Taiwan but also a security risk, today I bring everyone to look at the standard and finding a method of changing the tire jack fulcrum.

1, the right tire change method

1, SUV spare tire on the vehicle chassis or mostly directly fixed to the back of the trunk side of course also in the rear car and the like, and the cars are substantially below the floor of the luggage compartment.

2, extraction tool, the first jack the car slightly from the top, before the tire has not departing from ground nut to loosen the wheel, not the tire is done to follow the rotation when the nut is screwed, but sometimes as a nut or tight rust, other causes nut down, or even because of excessive force resulting in damage to the wrench. Here I teach you a trick, with a rag or paper towel moistened with flammable, screw on the nut ignited at about heating, hot plate lightly with a wrench can unscrew the nut. Of course, there are other ways, but this approach is the most primitive and effective, and be careful not to cause a fire.

3, after the nut loosen, continue to jack the car up the pressure, until the tire is completely off the ground, try to remove the original tires.

4, the spare tire installed, in accordance with the principle of diagonal order, all nuts are fixed.

5, finally lowered the jack to complete!

PS: spare tire usually remember to make steam, or standing pump. Once used to the emergency puncture; additional spare tire, spare tire just spare, once the original tire repaired or new ones to remember and then remove the spare tire to retain good, because most cars are not full-size spare tire tire!