Often run high-speed car owners know that even if you normally travel, can not avoid being hit by flying stones, our car windshield will be broken for no reason. At this time, some owners will come up with "tape" fill emergency, prevent high speed because the damage caused by the extension. Later 4S shop to repair to the store after some 4S stores will tell you directly for the windshield, the glass did not buy insurance of car owners may have to spent hundreds to thousands of yuan to replace the (more expensive luxury cars). If you do not repair, a long time with temperature and wind speed, pressure to let the cracks expand, to our security posed a great risk.

That there is no way to try to reduce costs? Of course there is! Here with me to look down.

Then we can try to spend hundreds of dollars to buy a glass repair kit, you can get yourself, but not all of the holes are applicable, take a look at what can be repaired?

1, the transparent region must tunnel, can not disturb the local /

2, the hole less than 20MM, no crack extension, or if there are more than 20 still need to extend the replacement 4S shop.

3, in the hole as far as possible to get two weeks, to prevent too much into the ash.

4, must not be repaired before the car wash, and do not wash after repair, because the water droplets into the hole will affect the repair effect. Not to play the glass with water cannons to prevent more serious!

How to make?

step 1:

Glass cleaner with alcohol and wipe around the hole four-clean, and then try to get out of the blizzard, make a little hole and the surrounding becomes smooth, (accidentally cut)

Step 2:

With paste set in the positioning, alignment of fixed hole, and then drop down into 4-5 drops repair liquid,

Step 3:

Inserted and fixed with a syringe attached to the broken out position of the gas, about 10 minutes.

Step 4:

Removed the syringe plunger, the pusher each re-injection, pressed down, try to repair the hydraulic penetrate into cracks in, probably about 15 minutes.

Step 5:

Paste gently tear fixed, fixed film paste, then the card will be forced out in the sun to bubble for 20 minutes.

Step 6:

Finally, the cured film torn to scrape excess glue with a blade!

Clothed yourself, the final effect is not out of the hole basic look, because the fixed-line branches have been freezing up inside the cave, but if the cracks and holes too big or go 4S shop repair.

Finally, I want to remind you that in high-speed or try a little further away from the cart to avoid friendly fire!