According to the theory of traditional medicine, winter is hiding the essence of the season, the saying goes, "39 make up one winter, the coming year, no pain" will be derived from this. Similarly, the winter maintenance vehicles, heavy anti-raising is particularly important. In winter, when the next encounter sleet, the windscreen easy to freeze, especially after a vehicle is parked at night, when the temperature at minus front windshield water is easy to freeze. To remove the frost, a lot of trucks will spend a lot of time, and even lead to delays in work hours of many owners. Today editor specifically looking for some solutions for your reference, to help owners avoid some car trouble.

Car glass frozen main reasons:

After the person away from the car, the car still remained hot, the glass is still hot so that the vehicle, when melting snow falls on the first glass; the snow melting process, the inside temperature is gradually decreased to the outside temperature and the temperature inside the vehicle with the same , melting snow began to freeze on the glass.

How to remove the car glass Frost

Method one: de-icing heater

The best way is to start the car, when the engine water temperature rises, with warm air blowing windscreen, until the ice melts. However, this method also has some drawbacks, is time-consuming, laborious, expensive oil. If the snow is no longer in the closed car, the water on the windshield can be wiped clean, and re-freezing can be avoided on the windshield. If it is when the snow, in closed car windshield can be wiped clean, and then the cage covered with a layer of paper on the windshield, so that then the car can be torn off the paper, do not worry about the windshield on the ice.

Method two: Physical deicing

The owner can prepare a rigid plastic blade, of course, also be dedicated shovel glass frost, glass frost shovel more convenient, fast, and ice-free hand. When snow and ice on a glass, plastic or glass blade eradicate to Frost. But Geely Global Hawk high-density Yun Fu a service station to remind the owners, except when snow and ice, to prevent scratching the glass, plastic or glass frost shovel blade can not blow back and forth, we should push in the same direction.

Method three: chemical de-icing

Currently there is a spray-icing agents on the market, which is designed for icing of the window and the wiper high-speed anti-icing spray thawed concentrate, does not damage the surface of the body to prevent re-soiling and icing. When low temperature of minus 30 , snow and ice can be easily removed, at the same time, it can prevent water and portions of the windshield icing or damage to the body surface, clean the glass after cleaning, without leaving streaks.

Method four: maintaining a uniform temperature outside the vehicle interior

After a day spent in the car, do not walk away immediately locked the car, but the door open ventilation, and other similar when the temperature dropped and the temperature outside the car the car (probably only a minute), and then turn on the power, with snow on the windshield wipers will look painted; this time, shut the door, locked car. The next morning, as long as the snow on the windshield wipe, no ice below the snow, you can immediately driving down the road.

Method five: anti-ice cover

Is currently on the market windshield partner, it is a national environmental materials, resistant to low temperatures of minus 40 degrees, double-sided anti-frost snow and cold, with just a cover, gently exposing morning, folding it in a package bag, hot car can start. Fuel saving. For cold days do not want to reach out to their torment, and love a clean car owners, it is the best choice.

In addition, the car covered with snow for the garment, mat or newspaper or plastic sheeting and tape the windows are very effective.

Cold winter car tips:

1, with warm deicing, do not use hot water

Winter window ice, remember not to use hot water and ice, although hot water much faster than warm water ice speed, but the risk is high, it is easy for windshield burst, after all temperature too much. But also detrimental to paint with cold water, and after the frost could be more serious. When the current is not very thick icing windshield, you can rinse with a cloth in warm water 40 - 50 degrees in a few times, then gently rub the windshield, wipe a few times and then rushed by about 40 degrees of warm water a punch, the general will be able to rinse. If the windshield icing thicker, while warm water with ice, to turn the vehicle, the car pointer to the middle temperature (temperature to about seventy to eighty degrees), the hot air blown to the windshield to twist, the maximum opening block, then, the glass heats up, it is easy to melt the ice up.

In addition, if the car is not being open, under the sun can be a better situation to drive under the sun to dry in the sun, until the ice of the sun, although this method is time-consuming, but it is also more economical entirely easy.

2, cold and warm air to eliminate the windows fog

Winter driving, due to the large difference in temperature inside and outside, easy to form a mist in the car, the driver's line of sight impact. There are two methods to eliminate fog, cold defogging one is, the other is defogging heater. Both methods help us eliminate fog on the glass, of course, we need to vent before the adjustment knob to position the wind windshield defogging or press the button.

Due to the low winter temperatures, cold defogging way to make the interior comfort of the poor seldom used. Circulating outside air entering the car, the engine warm-up after blowing warm air, but both defogging heating, plus do not start the compressor, reducing fuel consumption naturally, it is easy for everyone to accept. But in the winter rain, due to the humidity in the air is relatively large, use defogging heating effect is not obvious, and sometimes repeat fog. This time last solution, you can use air conditioning heating. Because the air conditioning in addition to regulating the temperature, there is a most important function is to dehumidify.